Digital pressure switches R1/8 male with internal M5 thread. Vacuum to 10 bar pressure ranges with 24V dc supply.
– Adjustable Set Points Upper and lower pressure points can be set providing switched outputs and colour change LCD display with adjustable hysteresis.
– Analogue Output Output provides analogue feedback signal for PLC input with ranges 1 to 5V or 4 to 20mA.
– Multi-Colour Display Colour changes from green to red when pressure goes outside of the pre-set zones, set by the operator.
Technical Data
Model
DPS-01Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â DPS-S10
Pressure range
-1 to 1 bar                         -1 to 10 bar
Measurement range
-100kPa to 100kPa           -0.100MPa to 1.000MPa
Setting rangeÂ
-100kPa to 100kPa           0.100MPa to 1.000MPa
Pressure withstandÂ
500kPa                             1.500MPa
Fluid
Compressed air 50μ
Measurement accuracyÂ
≤ ± 2% (full scale) at ambient temperature 25°C
Temperature errorÂ
≤ ± 3% (full scale) at ambient temperature 50°C
ThreadÂ
External thread R1/8 – Internal thread M5
Pressure displayÂ
LCD (two rows – dual colour display)
Status displayÂ
4 digit measurement value – output status display
Display modeÂ
4 adjustable backlight display options
VoltageÂ
12 to 24 VDC ± 10%
Power consumption
40mA max
Transistor output signalÂ
NPNÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PNP
Transistor output currentÂ
80mA max                              80mA max
Transistor output ΔPÂ
≤ 1V                                      ≤ 1V
Analog output signalÂ
1 to 5V or 4 to 20mA
Analog load resistance
≥ 1KΩ                                  ≤ 400Ω
Response time
2.5ms – 20ms – 100ms – 500ms – 1000ms – 2000ms (adjustable)
Circuit protection
Short circuit protection included as standard
Protection degree
IP40
Operating temperature
0 to 50°C
Operational humidity
35 to 80% RH (non-condensing)
Vibration resistance Amplitude
1.5mm – 10HZ to 500HZ (max) (2 hours each direction X,Y,Z)
